Loading... Please wait...

*Original* Penis Casting System with Vibrator (choice of skin tone)

$49.95
$69.95 (You save $20.00)
Availability:
Always ships Priority 2 to 3 days
Weight:
2.00 LBS
Shipping:
Calculated at checkout
Qty
  • Buy 2 - 3 and get 15% off
  • Buy 4 - 5 and get 20% off
  • Buy 6 - 10 and get 25% off

 Createamate Vibrating System

 Our vibrating system is Different than any other casting system that have imitated us

 We have had custom built vibrators which has been a long term vision where we saved, planned, and waited for production of a unit that fits perfectly in our Createamate Casting Systems.

 This creates a system for Folks who want a good vibrating kit with little to no errors when making.

 Our new custom vibrator is ½” wide allowing more silicone material around the unit making your replica feel more realistic.

 We utilize a super-fast impression material that captures you at your largest point.

 100% silicone rubber, which is safe, non-allergenic, tasteless and odorless.

 Capture your member in super fine detail that has a more realistic feel, as it is firm yet flexible. 

The pride of making the best casting system to bring you ability to create hours of fun!  

 Our Casting System Includes:

* 2 Bags of fast acting Impression Material (You have 2 chances to get it right)

100% Silicone Rubber with hardener and mixing stick

* New Custom Vibrator Insert                     

* Patented Mold Sleeve with Easy Pour Spout & Angle Adjuster-Our Casting Tube is 3/1/2" wide x 12" Long.

Procedure and Tips Page

 All Createamate products are Shipped Discreetly.

 

 

 

 

 

 

Create a Mate New Product Line for Penis Molding, Casting, or Copy, of your Male Member ()
  • Create a Mate New Product Line for Penis Molding, Casting, or Copy, of your Male Member

Write your own product review

  1. Trouble with Mold  star rating

    Posted by Mike on 2nd Jun 2016

    I used both mold kits to try to get a good impression. I followed the instructions as best I could. Anyway, on attempt two to get a good impression, the mold leaked out the bottom of the tube during setting, leaving the tip end of my impression with great detail, but the base of the shaft lost significant length and features (about 1.5-2 inches lost). My body is not flat; there are my danglies and other contours in the way, so the mold tube did not fit well. Also, the "pour immediately" instruction left the mold mix as a fast running liquid still, which helped it leak out quickly. I mixed for exactly 45 seconds, using 85 degree (F) water as instructed. Generally, I think the casting system could use a little work.

  2. Had a Blast making this!!!  star rating

    Posted by Fred B on 10th Dec 2015

    very FUN to make. We ordered 2, one with the vibrator and one with the suction cup. A word of advice, make sure the mold walls are thick enough or mold might split while casting spilling silicone everywhere, this happened to us on one of them. and if your length is longer than 6 inches you need to order extra silicone. we had a great time making the replica, we laughed, we had fun, and we are going to make another (ordering extra silicone this time). the replica is Amazing!! we couldn't believe how realistic it is, both in look and feel. it is so realistic that I might start to worry that my partner won't need me anymore, lol.

  3. thumbs up!!!  star rating

    Posted by Unknown on 21st Feb 2015

    Very fun for the adventurous couple (:

  4. Shipping to Australia I'd like to share this with you all.  star rating

    Posted by Andrew: createamate@gmail.com on 3rd Jan 2015

    Product & Tracking Information
    Postal Product:
    First-Class Package International Service
    Features:
    Delivery Confirmation International
    DATE & TIME
    STATUS OF ITEM
    LOCATION
    December 18, 2014 , 1:31 pm
    Delivered
    AUSTRALIA
    Your item was delivered in AUSTRALIA at 1:31 pm on December 18, 2014.
    December 17, 2014 , 1:06 am
    Processed Through Sort Facility
    AUSTRALIA
    December 15, 2014 , 6:54 am
    Departed
    Perth, AUSTRALIA
    December 13, 2014 , 8:37 am
    Arrived
    New York, UNITED STATES
    December 12, 2014 , 2:33 pm
    Processed Through Sort Facility
    ISC NEW YORK NY(USPS)
    December 12, 2014 , 1:36 pm
    Arrived at USPS Origin Facility
    JAMAICA, NY 11430
    December 12, 2014 , 1:36 pm
    Arrived at Sort Facility
    ISC NEW YORK NY(USPS)
    December 12, 2014 , 12:21 pm
    Accepted at USPS Origin Sort Facility
    LONG BEACH, NY 11561
    December 11, 2014 , 2:53 pm
    Shipping Label Created
    LONG BEACH, NY 11561

  5. Best with a parter  star rating

    Posted by Unknown on 10th Nov 2014

    Since my wife and I are apart for long periods of time, we thought this would be a fun thing to try. I made it harder on myself by doing it alone and trying to capture more than just the shaft (if you get my drift). Having another set of hands would have made it much easier, but it was still manageable alone with the right preparation. The end product was just what we hoped for and we are both excited for the first test drive.

  6. Good product, straight forward directions  star rating

    Posted by Unknown on 22nd Oct 2014

    I'm pleased with this product. I was able to get a good cast on the first try. And the directions were very clear. There are some minor things that can be avoided if you set yourself up and be patient. For example, I put some water in the tube before casting to make sure it wasn't going to leak. A little tape fixed a small leak spot. I made the cast alone but having your partner there to help eliminates most complications and serves as a fun time. If you lay out your supplies, read through the directions, give yourself a dry run on anything your unsure about it's easy to get a good cast on the first try.

  7. Great Results  star rating

    Posted by Unknown on 22nd Oct 2014

    The second bag of batter was appreciated. We mixed the first bag to long and it solidified as we were pouring into the tube, but the second bag worked great. The finish product looks fantastic, does a great job of capturing the imprint.

  8. Staying hard  star rating

    Posted by Unknown on 22nd Oct 2014

    I really did have fun with my mate for the hard part staying hard. Once I read the directions it was easy to do. So read the directions, us guys do not like to do that.

  9. Fun project...  star rating

    Posted by Unknown on 22nd Oct 2014

    It was a fun experiment. Get ready to have a good laugh with your partner, it's one of those sexy yet awkward moments! I'm very appreciative of the extra bags of alginate. It's a trial-by-error project, but we ended up with 2 successful molds to choose from. I had a problem with air bubbles in both the alginate and the silicone, I guess I wasn't mixing as gently as I thought. So, future buyers, remember to be mindful when you're stirring!
    Overall, the mold is a good likeness (veins and all!), shipping was quick even outside of the US, the silicone is odorless as promised and just the right firmness.

Return Unopened in 30 days for full refund

Sign up and receive discount codes

View Cart Go To Checkout